Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Mr-Glass Sliding Glass & Patio Doors in South Miami: What to Know First
We provide independent Mr-Glass sliding glass & patio door repair and replacement across South Miami, with most track, roller, and lock issues handled in a single visit. Typical repair work runs $185 to $485 depending on the series and what’s worn out; full door replacement starts around $1,800 and climbs with glass package and size. If you own a Mr-Glass door and it’s dragging, sticking, or leaking, call (850) 930-1813 and we’ll give you a straight answer over the phone before we ever schedule a truck.
This page is for South Miami homeowners who bought Mr-Glass sliding doors and want someone who actually knows the product, not a generalist who’ll shrug and upsell a full replacement. We’re an independent Mr-Glass service provider, not a factory-authorized dealer, which means we call the problems as we see them.
How Mr-Glass Products Fail - and How We Fix Them
Mr-Glass builds a solid door, but every product line has its patterns. Here’s what we see most often in South Miami homes, series by series.
- Mr-Glass 7000 Series sliding doors: worn tandem rollers. The 7000 uses a nylon-wheel tandem roller assembly that grinds down after years of salt air and sandy track grit. Symptom: the door lifts, then drops when you slide it past the halfway point. The real cause is usually a bent roller housing, not just a flat wheel. We replace the entire tandem assembly, not just the wheel, because replacing half of a worn pair means you’re back in the same spot in 18 months.
- Mr-Glass 6000 Series: latch misalignment after slab movement. South Miami sits on porous limestone and sandy soil. Homes shift. The 6000’s mortise latch is less forgiving than other lines, so when the slab settles even a quarter inch, the hook misses the keeper and the door won’t lock. We reset the strike plate and shim the frame rather than force the latch, which keeps the door square and the warranty intact.
- Mr-Glass impact-rated doors (PGT-built frames, Mr-Glass glass packages): seal failure at the interlock. Many South Miami homes have Mr-Glass doors with impact glass built into a heavier frame. The known weak point is the interlock weatherstrip where the two panels meet. Ours wears to a flat ribbon in three to five years. Symptom: a fine line of daylight or a whistle during easterly winds. We replace the interlock with a dense foam bulb seal that holds shape longer than the original felt-fin strip.
- Mr-Glass 800 Series 3-panel doors: center panel drift. The 800’s three-panel configuration puts more weight on the center carrier. Over time, the center panel drifts out of alignment and starts catching the side panel. The cause is often a stretched steel cable in the carrier block, not the track itself. We re-cable and re-balance the center carrier and set the panel back to spec.
- Mr-Glass screen doors on sliders: top-hung roller spring fatigue. The screen door is the first thing to fail. The top-hung spring rollers on Mr-Glass screens lose tension, and the door starts dragging and jumping the track. We replace the spring rollers with stainless hardware rated for coastal salt exposure, which outlasts the factory zinc parts by a noticeable margin.
One more thing worth saying plainly: Mr-Glass warranties cover manufacturing defects, not South Miami’s salt, sand, and settling slabs. We document the mode of failure in writing and photograph everything, so if your door is still under warranty, you’ve got a clear record to take to the manufacturer.
Our Mr-Glass Sliding Glass & Patio Doors Process
Every Mr-Glass job we run follows the same sequence, whether it’s a sticking track or a full door swap.
- 1
Phone diagnosis. You call (850) 930-1813 and describe the problem. We ask the right questions: which side sticks, when it started, any recent storms or construction. We’ll tell you honestly whether it sounds like a repair or a replacement.
- 2
On-site inspection. We measure, lift the panel, check the rollers, inspect the interlock, and look at the frame for signs of settling. We put eyes on the exact Mr-Glass series you have and note its condition.
- 3
Parts decision. For rollers, seals, and locks, we use OEM Mr-Glass parts when they’re available and make sense. When the factory part is a known weak point (nylon rollers, felt interlock seals), we recommend the aftermarket upgrade and explain the difference in plain terms. You decide.
- 4
The work itself. We lay down drop cloths, remove the panel carefully, and replace exactly what’s failed. No upsell, no “while we’re here” pile-on unless you ask.
- 5
Operation test. We slide the door fifty times. We check the lock, the seal, the level. If it doesn’t move like a new door, we don’t leave.
- 6
Cleanup and guarantee. We vacuum the track, wipe the glass, and walk you through what we did. Every repair and installation carries our Done Right Promise: if it’s not done right, we make it right.
What Mr-Glass Sliding Glass & Patio Doors Costs in South Miami
Honest numbers, not a mystery quote. Here’s what we charge for common Mr-Glass work in South Miami:
- Single roller replacement (both wheels): $185-$245
- Full tandem roller assembly, 7000 or 800 series: $285-$385
- Latch and strike plate realignment: $150-$225
- Interlock weatherstrip replacement: $130-$210
- Complete track replacement: $380-$580
- New Mr-Glass sliding door, 2-panel, standard glass: $1,800-$2,800 installed
- New Mr-Glass impact-rated sliding door: $3,200-$5,500 installed, depending on size
What moves the price: panel size, glass package, whether the track is bent, and whether the frame needs shimming. The quote we give before we start is the price you pay when we finish. No change orders. Call (850) 930-1813 for a free estimate on your specific door.
Why South Miami Homeowners Call Winslow Windows & Doors for Mr-Glass Work
Ed Winslow grew up in the Sunset neighborhood of South Miami, near Dante Fascell Park, and he’s been working on windows and doors across this city for the better part of two decades. His name’s on the truck - if the work isn’t right, neither is he. That’s not a slogan. That’s the way we run the business.
We show up when we say, our technicians are background-checked and in uniform, and a live person answers the phone 24 hours a day. If your Mr-Glass door can’t be saved and you’re considering something else, we also install PGT, CGI, CWS, and ES Windows, so your next door comes from a brand lineup we know inside and out. And every job, whether it’s a $185 roller swap or a $5,500 impact door, carries the Done Right Promise.
FAQs
Mr-Glass warranties typically cover manufacturing defects for a set number of years, but they don’t cover wear from salt air, sand, or slab settling, which are exactly the forces we deal with in South Miami every day. We document every failure in writing and photos so you can submit a clean claim if yours is still covered.
We use OEM Mr-Glass parts when they’re available and appropriate. For known weak points like nylon rollers and felt interlock seals, we’ll show you a stainless or dense-foam aftermarket option that lasts longer in South Miami’s conditions. The choice is always yours, and we’ll tell you which we’d put in our own house.
If the frame is square, the glass is intact, and the track isn’t bent, repair usually wins. If the frame has shifted beyond shimming or the glass has lost its seal, replacement is the better money. We’ll tell you straight, and we’ll never push a replacement when a repair will do. Call (850) 930-1813 and we’ll talk it through before scheduling anything.
Most Mr-Glass repairs we handle are completed in a single visit, and a live person answers our phone around the clock to get you scheduled. We carry the common Mr-Glass rollers, seals, and latch parts on our trucks, so we’re not running back and forth to a supply house.
No trip charge inside our home county, and we offer a free second opinion on any written estimate you’ve received from another company. If you’re a senior or a veteran, you’ll also get our permanent 10% discount. The one down the road is still the one to call.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving South Miami and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.










Before
After
Before
After
Before
After