Therma-Tru Shingle, Tile & Metal Roofing Nationwide | Winslow Windows & Doors

Therma-Tru Shingle, Tile & Metal Roofing in South Miami: What to Know First

If you own a Therma-Tru entry system and need shingle, tile, or metal roofing work on your South Miami home, we’re the independent service provider who can handle it. Most Therma-Tru-related roofing jobs in South Miami take one to two days once we’re on site, and we give you a written line-item quote before any work begins, so the number you approve is the number you pay. Call (850) 930-1813 and you’ll reach a live person who can talk through exactly what’s going on with your roof and your Therma-Tru entry.

Call (850) 930-1813

This page is for South Miami homeowners who want straight answers about protecting their Therma-Tru investment when roofing work is needed. Ed Winslow grew up in the Sunset neighborhood near Dante Fascell Park, and he’s been doing this work since 2011. The Done Right Promise means what it says: if it’s not done right, we make it right.

Key Takeaways

• We install shingle, tile, and metal roofing in South Miami as an independent service provider - not a Therma-Tru affiliate.
• Written line-item pricing with no change orders on Therma-Tru-related roofing jobs.
• Background-checked, uniformed techs who know how roofing work affects Therma-Tru entry systems.
• Done Right Promise on every job, including any Therma-Tru component involved.
• $40 off any repair over $200, free second opinions on written estimates, no trip charge in our home county, and 10% off for seniors and veterans - always.

How Therma-Tru Products Fail - and How We Fix Them

Therma-Tru builds doors, not roofs, but the interface between your roof and your Therma-Tru entry system is where problems surface. Here’s what we see in South Miami homes and how we fix it.

• Sill flashing failure at the entry threshold. On Therma-Tru Classic-Craft and Fiber-Classic entry doors, the sill pan flashing underneath often gets installed without enough slope away from the house. When shingle or tile roof runoff pours into that area during a Miami downpour, water backs up at the threshold. We pull the door, reflash the sill with proper pan integration, and reset the unit level and square.
• Roof-to-wall flashing gaps at side of entry. South Miami tile roofs shed water hard and fast. If the step flashing where roof meets the side jamb of a Therma-Tru door was done with off-the-shelf metal instead of a custom-bent profile, water tracks sideways into the rough opening. We’re on every South Miami roof seeing this. The fix is removing the affected tile or shingles, installing proper stepped counter-flashing, and re-bedding the tile so the channel moves water away from the Therma-Tru frame.
• Kickout flashing missing above Therma-Tru transoms and sidelites. Therma-Tru doors with transoms and sidelites have a wider rough opening that catches roof water migrating along the wall line. Without a kickout diverter, water runs down the wall and into the top of the Therma-Tru frame. We install a proper kickout at the roof eave above any Therma-Tru opening, then test it with a hose to see the water arc away from the entry.
• Rot at the sub-sill from tile roof runoff splash. On Therma-Tru Multi-Point locking systems, the bottom rail seals against the sill, but if the sub-sill underneath is soft from years of roof splash water, the whole system loses its compression. We replace the sub-sill with PVC or marine-grade material before resetting the Therma-Tru door, so the lock points re-engage properly.
• Improper head flashing on Therma-Tru patio door systems under flat tile roofs. South Miami flat tile and barrel tile roofs hold water at the fascia longer than shingle roofs do. On Therma-Tru sliding patio doors, the head flashing often gets tucked behind the roof membrane incorrectly or left too short. Water gets behind the top frame and drips inside. We remove the affected roof material at the eave, install a proper drip edge and header flashing that telescopes over the Therma-Tru frame, and re-seal the roof to the new flashing plane.

Our Therma-Tru Shingle, Tile & Metal Roofing Process

Here’s how a Therma-Tru-related roofing job goes when you call us in South Miami.

1. 1
   Call and diagnosis. You call (850) 930-1813, and a live person picks up. We ask about what you’re seeing inside and out, then schedule a visit.
2. 2
   On-site inspection. Our tech walks the roof and the Therma-Tru entry system together, because one informs the other. We look for the failure point where roof meets door and document what we find with photos you can see.
3. 3
   Parts decision. Therma-Tru components like sill pans, bottom sweeps, and threshold caps we source from Therma-Tru distribution. Flashing, roofing materials, sub-sills, and non-proprietary hardware we spec from brands we know hold up in South Miami’s salt air and monsoon rains. We’ll tell you where OEM matters and where a quality aftermarket part saves you money without losing service life.
4. 4
   Written quote. Line-item pricing in writing. The standing offer: $40 off any repair over $200, free second opinion on any written estimate you’ve gotten elsewhere, no trip charge inside our home county.
5. 5
   The work. We reflash, re-roof, and reset as needed. Uniformed techs, background-checked, working clean and covering your furniture before opening any opening.
6. 6
   Test and guarantee. Water-test the interface, verify the Therma-Tru door locks and seals properly, then walk you through what we did. The Done Right Promise covers every job we do, including the Therma-Tru parts of it.

What Therma-Tru Shingle, Tile & Metal Roofing Costs in South Miami

Here are honest numbers for common Therma-Tru-related roofing scenarios in South Miami.

• Kickout and step flashing repair at Therma-Tru entry: $400-$800 depending on roof type and how many courses need pulling.
• Full sill pan replacement with sub-sill rebuild on Therma-Tru door: $600-$1,200 depending on frame condition and whether tile needs resetting.
• Header flashing rebuild above Therma-Tru patio door: $500-$1,000 including roof membrane repair at the eave.
• Small-area shingle re-roof at Therma-Tru entry interface: $800-$1,500 depending on square footage and underlayment condition.
• Tile re-bed and re-flash around Therma-Tru entry with new underlayment section: $1,200-$2,500 depending on tile profile and waste factor on the existing roof.

What moves the price: roof type (flat tile costs more to work around than shingle), how much flashing we’re replacing rather than repairing, whether the Therma-Tru rough opening itself shows rot, and access. Steep roofs, two-story walls, and brittle tile that breaks when lifted all add time and material. Call (850) 930-1813 for an exact written quote - estimates are free.

Why South Miami Homeowners Call Winslow Windows & Doors for Therma-Tru Work

We’ve been doing this in South Miami since 2011, and Ed Winslow’s name is on the door - and on every job we do. We’re not a call center and not a national chain. When you call (850) 930-1813 at any hour, a live person answers. No voicemail loops.

Beyond Therma-Tru, we install and service PGT, CGI, CWS, and ES Windows products, so we understand how roofing decisions affect every opening in your house, not just the one with the Therma-Tru label. Our techs are background-checked and arrive in uniform. Published address, published license number. Free second opinions on written estimates. Permanent 10% discount for seniors and veterans. And the Done Right Promise - if it’s not done right, we make it right, which is a longer standard of accountability than any national installer will put in writing. The one down the road.

FAQs

Does repairing the roof around my Therma-Tru door void the Therma-Tru warranty? No. Therma-Tru’s warranty covers the door unit itself, not the flashing or roof work around it. Proper re-flashing and re-roofing won’t void your Therma-Tru door warranty, and doing it right actually protects the door from water damage that Therma-Tru won’t cover. Call (850) 930-1813 if you want us to check your specific model before work begins.

How fast can you get Therma-Tru parts for a roofing-related door repair in South Miami? Standard Therma-Tru components like sills, sweeps, and threshold caps are typically available through South Florida distributors within one to three business days. Proprietary glass or specialty hardware on Classic-Craft and Fiber-Classic models can take longer. We’ll tell you the lead time before you commit to anything. Estimates are free.

Should I replace my Therma-Tru door at the same time as my South Miami roof replacement? If the door itself is still sound-frame square, locks engaging, no rot in the stiles-there’s no reason to replace it. New flashing, new sill pan, and proper integration with the new roof will protect it as well as the day it was installed. If the rough opening has rot or the door’s been water-exposed for years, we’ll tell you straight whether repair or replacement makes sense.

Do you pull permits for roofing work in South Miami? Yes. We pull permits and schedule inspections where South Miami code requires them, and we don’t do work without passing a final inspection. It’s part of doing it right and part of why the Done Right Promise means something.

Will the price change once the work starts? No. Our quotes are written and line-itemed, and we don’t do change orders unless you ask for additional scope. The number we quote is the price you pay. Call (850) 930-1813 to schedule your free estimate.

Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving South Miami and nearby areas.