Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterCGI Door Installation: The South Miami Owner’s Guide
Replacing a failed part on a CGI door in South Miami typically runs $285 to $640 installed, depending on whether we’re swapping a threshold, replacing weatherstripping, or rebuilding the bottom rail. We stock the common CGI wear components on our trucks, so most South Miami callers get same-week service, and we carry OEM-grade parts that match your series rather than one-size-fits-all generics. The way most homeowners discover a problem is simple: the door starts dragging, daylight shows under the threshold, or the locking mechanism gets stubborn. One morning it won’t latch. That’s the call we get.
CGI doors are built for hurricane country, but South Miami’s salt air, afternoon downpours, and direct sun punish the parts that move. We’ve been replacing door components across South Miami since 2011, and we know exactly which pieces fail first on which models.
Which CGI Models This Applies To
CGI makes several impact-rated door lines, and the parts are not universally interchangeable. The main series we see in South Miami homes are the Estate Collection, the Targa series, and the Clásica line. Each uses its own bottom-sweep profile, threshold geometry, and hinge spec. Here’s the gotcha we run into constantly: a door labeled “CGI” on the hardware is often paired with a frame from a different manufacturer, and the original part number is on a sticker that South Miami humidity peeled off years ago. We identify the right part by measuring the door slab thickness, the sweep channel width, and the hinge mortise depth rather than relying on a label.
On OEM versus aftermarket: for moving, load-bearing components like hinges and multi-point lock rods, we recommend OEM or OEM-equivalent CGI parts. The tolerances matter more than people expect. For wear items like sweeps and weatherstripping, a quality aftermarket replacement is often just as good and costs 30 to 50 percent less. We’ll tell you which is which and why before you spend a dollar.
Signs Your CGI Door Installation Is Failing
Here’s what South Miami homeowners notice before they call us:
- The door drags or scrapes on the threshold. This usually points to a worn bottom sweep or a hinge that’s begun to sag. On CGI’s heavy impact doors, hinge wear shows up faster than on standard doors because the slab weighs more; South Miami heat accelerates the grease breakdown.
- Daylight is visible under the closed door. The adjustable threshold has settled or the sweep has compressed. It’s not just an energy problem. In South Miami’s rainy season, that gap is how water finds your tile.
- The multi-point lock sticks or won’t fully engage. CGI doors lock at three points, and the rods need to align precisely with the frame strikes. When the door settles or a strike plate shifts, the lock fights you. Forcing it snaps the gearbox.
- You feel a draft or hear road noise through the door’s perimeter. The weatherstripping and jamb seals have flattened. South Miami’s UV eats the rubber compounds faster than most of the country, so we typically see sealing failure around year five to seven.
- Condensation or fog appears in the glass. On CGI doors with insulated glass, a failed seal means the panel has lost its argon and its insulating value. The door frame may be fine; the glass insert needs replacement.
Key Takeaways
- CGI door parts are series-specific. A Targa sweep won’t correctly fit an Estate door.
- Most South Miami door failures are wear items: sweeps, hinges, weatherstripping, thresholds.
- We quote the part and the labor separately so you see exactly what you’re paying for.
- OEM matters for the locking system. Aftermarket is fine for sweeps and seals.
Replacement Cost & What’s Included
Here’s what we actually charge in South Miami. These are installed prices, not parts-only figures:
- Bottom sweep replacement: $95 to $175
- Weatherstripping and jamb seal replacement: $140 to $260
- Threshold replacement, including new sweep: $180 to $340
- Hinge replacement and full door re-alignment: $220 to $420
- Multi-point lock rod or gearbox replacement: $285 to $640
- Insulated glass insert replacement: $380 to $740, depending on panel size and glass type
The range comes from the specific CGI series, the condition of the surrounding frame, and whether we’re doing one component or a full seal-and-hardware refresh. Every quote is line-item: part cost and labor shown separately, no lump-sum guessing. The Done Right Promise applies to every door repair and installation we perform in South Miami. If it’s not done right, we come back. It’s that simple. Winslow Windows & Doors is an independent installer; we’re not affiliated with CGI, and we’ll say plainly whether we’re using an OEM part or a quality equivalent.
DIY or Call Us?
Some CGI door maintenance is genuinely safe to do yourself. Cleaning and lubricating the track, clearing debris from the threshold, and inspecting visible weatherstripping are all fine. None of those will seriously hurt you. Here’s what we tell our South Miami neighbors not to mess with: anything involving the multi-point lock. That system is a precision mechanism under tension, and when a gearbox lets go while someone has a hand inside the door pocket, it’s a broken finger. Hinge re-alignment on a 180-pound impact door is also not a solo job. One slip and you’re injured or the slab is damaged. If the part is a sweep or a seal and you’re handy, have at it. If the door isn’t latching, sagging, or the lock is binding, call us at (850) 930-1813. Ed’s name is on the door, and on every job we do.
FAQs
Plan on five to seven years for sweeps and weatherstripping in South Miami’s UV and salt air. Hinges can go ten to fifteen years if the door was installed square and gets occasional lubrication.
Some components, like a bent multi-point lock rod or a stripped strike plate, can sometimes be repaired. Most wear parts can’t; they’re designed to be replaced. We’ll tell you which is the smarter spend before we touch the door.
A sweep or weatherstripping swap takes under an hour. A full hinge replacement and re-align is two to three hours. Glass insert replacement can take up to a week because we order the sealed unit to your exact panel size.
We stock common sweeps, weatherstripping, thresholds, and hinge sets for the CGI Estate, Targa, and Clásica series. Less common hardware, like a full multi-point lock gearbox, we can usually source within a week.
Winslow Windows & Doors keeps our commitments permanent. $40 off any repair over $200. Free second opinions on any written estimate from another contractor. No trip charge inside our home county. And a permanent 10 percent discount for seniors and veterans. Call (850) 930-1813; a real person answers, 24 hours a day, seven days a week. No voicemail loops, no call centers. That’s how we’ve done it since 2011, and it’s how we’ll keep doing it for our neighbors in South Miami. The one down the road.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving South Miami and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.